How do you reset a Danby portable air conditioner?

Danby portable air conditioners can be reset in a couple of different ways, including a factory reset, an internal sensor reset, and a circuit breaker reset.

Danby is known for having a wide variety of products, including their air conditioners, which come in a variety of shapes and sizes to suit every space and budget.

Among this wide variety, the Danby portable air conditioners are a convenient all-in-one solution to cool your home. However, this feature can make it complicated to reset the different components.

About Danby air conditioners

Since Danby was founded in Quebec in 1947, this company has become most well-known for manufacturing and producing air conditioners with a sleek design that are compact enough to fit into almost any space.

Danby has a wide range of air conditioners, including window units, portable units, ductless split systems, and packaged terminal air conditioners that customers can choose from.

Within each of these categories, there are air conditioners with varying capacities, shapes, and sizes available, to ensure that everyone can find the product that is right for their space and wallet, like this Danby 14,000 BTU Portable Air Conditioner, which is currently available on Amazon.

This unit can cool a space that is up to 700 square feet in size and it is only $979.

Buy it on Amazon

How do you reset a Danby portable air conditioner?

Although Danby has been producing air conditioners for such a long time, there are still some situations in which the system may go haywire and when your Danby portable air conditioner is just not working like it should.

There are many troubleshooting solutions you can try when your portable air conditioner is not working properly or displaying an error, but resetting the system is usually a good first step.

However, since portable air conditioners have quite a few components built into a single unit, you can reset a few different components on their own.

For instance, with most of the Danby portable air conditioners, and specifically this DPA140HE3BDB-6 model, as mentioned above, when the display shows a “PF” error on the screen, this requires that you only reset the internal sensors and not the entire air conditioner.

Other models do have a “Reset” button located under the back panel, which will perform a complete factory reset on your entire air conditioner and restore it to its factory settings.

Some models do not have a dedicated reset button, in which case you will have to reset the circuit breakers for your air conditioner, by plugging it out and back in again.

If these reset procedures are not working for you, there are also other common troubleshooting solutions that you can try to resolve issues or errors that you experience when you use your Danby portable air conditioner.

How to reset the internal sensors for your Danby portable air conditioner

If your Danby portable air conditioner is displaying a “PF” error message when you turn it on, this is indicative of a sensor failure. In this case, you need to reset the internal sensors to clear the error message.

To do this, you need to follow these steps:

  • Step 1: Unplug your air conditioner
  • Step 2: Wait at least five minutes
  • Step 3: Plug the air conditioner back in

If this reset procedure does not clear the error message from your display, it may be an indication that there is a more serious problem and that you may need to contact the Danby customer support center for more assistance.

How to factory reset your Danby portable air conditioner

To do a factory reset on most Danby air conditioner models, you need to locate the “Reset” button inside the back of the unit. Then, you must unscrew the back panel to find this button, but when you do, you need to press and hold the button in for at least 30 seconds.

On some models, you have to press a button labelled “Test” for the “Reset” button to pop up after you have turned off the power supply to your air conditioner.

On other models, there is no reset button, and in this case, it is best to reset the circuit breakers. This can be done by switching the circuit breakers on your electrical panel off, waiting a few seconds, and switching them on again.

Other troubleshooting solutions

If the problems with your air conditioner persist even after you have reset it and the error code is not indicating a sensor failure, some of the common issues that can prevent Danby portable air conditioners from working properly include:

  • Dirty or clogged air filters
  • Dirty or damaged coils
  • Compressor or thermostat issues
Categories Air

Leave a Comment